Bulk Mason Sand Delivery in Boynton Beach, FL

Bulk Mason Sand delivered across Boynton Beach starts at $33.17/ton, delivery included. On Boynton Beach's higher, drier ground, mason sand screeds smooth and stays put — a fine, uniform bed for pools, pavers, and mortar work that still drains after summer rain.

Fine, screened sand with a soft, uniform grain — the working sand for mortar and stucco, paver joints, and the smooth leveling bed under above-ground pools.

Enter your ZIP for an exact delivered price and a date.

Starting at

$33.17/ton

Delivery included

See your delivered price in 30 seconds

3 quick steps — your price shows right on this page. No callbacks, no waiting.

1Delivery
2Quantity
3Your price

Where's it going?

A ZIP is all we need to price delivery by zone.

Delivery ZIP

Mason Sand in Boynton Beach — the quick facts

Price: Starting at $33.17/ton, delivery included
Delivery: typically 2–3 business days
Local ground: Sand over limestone · Zone X
Best months: October–May
Typical job: Above-ground pool base ≈ 4.5 tons

What to know about Boynton Beach

Local ground

The ground here is sandy ground over limestone that drains reasonably well, so a 3–4 in planting layer with some compost establishes lawns and beds cleanly.

Drainage & flood

On Boynton Beach's higher, drier ground, mason sand screeds smooth and stays put — a fine, uniform bed for pools, pavers, and mortar work that still drains after summer rain.

Best months to install

Around Boynton Beach: October–May.

How delivery works

We deliver with a tri-axle dump truck — it needs about 12 ft of gate width and 14 ft of overhead clearance. You don't need to be home: mark your drop spot with a cone or spray paint and we'll text photo proof when it's done.

Sizing Mason Sand for your project

Full Mason Sand specs

Above-ground pool base

24 ft circle × 2 in

≈ 4.5 tons

Screed dead level and compact lightly — hollows under the liner show forever.

Paver joint sweep

400 sq ft × 1 in

≈ 2.0 tons

Sweep dry sand into the joints, compact, and sweep again until they stay full.

Mortar and stucco work

3–10 yards

≈ 3–10 yards

Keep the pile covered — wet sand throws off mortar proportions.

Mason Sand vs Concrete Sand — which do you need?

Mason Sand

Choose mason sand for mortar, stucco, paver joints, and pool bases — the fine, even grain screeds smooth and packs tight.

Concrete Sand

Choose concrete sand for bedding and mixes that need drainage — the coarser washed grain compacts predictably and lets water through.

See Concrete Sand in Boynton Beach

Mason Sand delivery in Boynton Beach — FAQ

How much does Mason Sand delivery cost in Boynton Beach?

Bulk Mason Sand delivered to Boynton Beach starts at $33.17/ton with delivery always included — the price at your ZIP is the all-in price, no separate haul fee. Enter your address for an exact quote and open dates.

Do you deliver Mason Sand to all of Boynton Beach?

Yes — we deliver bulk Mason Sand across Boynton Beach and the surrounding Palm Beach County area. Enter your ZIP to confirm your address is in range and see your delivered price.

How much Mason Sand do I need for a Above-ground pool base in Boynton Beach?

A typical Above-ground pool base runs about 4.5 tons, but it depends on your dimensions. Use the calculator on this page to enter your size and get the exact amount and delivered price for your Boynton Beach address.

Mason Sand delivery near Boynton Beach

Mason Sand near Delray Beach Mason Sand near Lake Worth Mason Sand near Lake Worth Beach Mason Sand near Boca Raton Mason Sand near West Palm Beach Mason Sand near Palm Beach Mason Sand near Wellington Mason Sand near Loxahatchee Mason Sand near North Palm Beach Mason Sand near Palm Beach Gardens Mason Sand near Jupiter Mason Sand near Belle Glade

See my prices