Bulk Mason Sand Delivery in Jacksonville, FL

Bulk Mason Sand delivered across Jacksonville starts at $40.78/ton, delivery included. Much of Jacksonville sits low near the water, and washed mason sand still works clean on damp ground — it screeds level for pool bases and paver joints and drains instead of holding water.

Fine, screened sand with a soft, uniform grain — the working sand for mortar and stucco, paver joints, and the smooth leveling bed under above-ground pools.

Enter your ZIP for an exact delivered price and a date.

Starting at

$40.78/ton

Delivery included

See your delivered price in 30 seconds

3 quick steps — your price shows right on this page. No callbacks, no waiting.

1Delivery
2Quantity
3Your price

Where's it going?

A ZIP is all we need to price delivery by zone.

Delivery ZIP

Mason Sand in Jacksonville — the quick facts

Price: Starting at $40.78/ton, delivery included
Delivery: typically 2–3 business days
Local ground: Sandy flatwoods (Spodosol) · Zone AE
Best months: October–May
Typical job: Above-ground pool base ≈ 4.5 tons

What to know about Jacksonville

Local ground

The ground here is sandy flatwoods that holds water after rain, so build the planting layer up a few inches and grade it so beds don't sit wet.

Drainage & flood

Much of Jacksonville sits low near the water, and washed mason sand still works clean on damp ground — it screeds level for pool bases and paver joints and drains instead of holding water.

Best months to install

Around Jacksonville: October–May.

How delivery works

We deliver with a tri-axle dump truck — it needs about 12 ft of gate width and 14 ft of overhead clearance. You don't need to be home: mark your drop spot with a cone or spray paint and we'll text photo proof when it's done.

Sizing Mason Sand for your project

Full Mason Sand specs

Above-ground pool base

24 ft circle × 2 in

≈ 4.5 tons

Screed dead level and compact lightly — hollows under the liner show forever.

Paver joint sweep

400 sq ft × 1 in

≈ 2.0 tons

Sweep dry sand into the joints, compact, and sweep again until they stay full.

Mortar and stucco work

3–10 yards

≈ 3–10 yards

Keep the pile covered — wet sand throws off mortar proportions.

Mason Sand vs Concrete Sand — which do you need?

Mason Sand

Choose mason sand for mortar, stucco, paver joints, and pool bases — the fine, even grain screeds smooth and packs tight.

Concrete Sand

Choose concrete sand for bedding and mixes that need drainage — the coarser washed grain compacts predictably and lets water through.

See Concrete Sand in Jacksonville

Mason Sand delivery in Jacksonville — FAQ

How much does Mason Sand delivery cost in Jacksonville?

Bulk Mason Sand delivered to Jacksonville starts at $40.78/ton with delivery always included — the price at your ZIP is the all-in price, no separate haul fee. Enter your address for an exact quote and open dates.

How soon can I get Mason Sand delivered in Jacksonville?

Most Jacksonville orders go out next business day, and some ZIPs qualify for same-day. Your exact lead time shows once you enter your address.

How much Mason Sand do I need for a Above-ground pool base in Jacksonville?

A typical Above-ground pool base runs about 4.5 tons, but it depends on your dimensions. Use the calculator on this page to enter your size and get the exact amount and delivered price for your Jacksonville address.

Mason Sand delivery near Jacksonville

Mason Sand near Atlantic Beach Mason Sand near Neptune Beach Mason Sand near Jacksonville Beach

See my prices